News

Requirements For The Forging Press Equipment

Safety requirements for the use of forging press equipment

Punching press is a common forging equipment. It is widely used. During use, if not operated according to requirements, some safety issues may arise. What are the safety requirements for using punch presses?

1.The transmission components outside the stamping machine must be equipped with protective covers. It is prohibited to drive or test drive when removing the protective covers;

2.Before driving, check whether the main fastening screws are loose, whether the mold has cracks, and the operating mechanism. Automatic stop device. clutch. Are the brakes functioning properly, and is the lubrication system blocked or lacking oil. If necessary, you can drive an empty vehicle for testing;

3.Pay attention to work and strictly prohibit putting hands, tools, and other items into dangerous areas. Small items must be operated with specialized tools (tweezers or feeding mechanisms). When the mold is stuck in a blank, only tools can be used;

4.When installing the mold, the slider must be opened to the dead center, the closing height must be correct, and eccentric loads should be avoided as much as possible; The mold must be firm and undergo pressure testing;

5.When washing the workpiece, hands and feet must be away from the button or pedal to avoid accidental operation;

6.If the pressing machine runs abnormally or produces abnormal sounds (such as knocking and bursting sounds), the feeding should be stopped immediately and the cause should be checked. If the rotating components become loose. Operating device malfunction. Mold looseness and defects should be stopped for repair;

7.When two or more people are operating, they should assign someone to start the stamping machine and pay attention to coordination and cooperation. Before leaving work, the mold should be grounded, the power should be disconnected, and necessary cleaning should be carried out.